Tape Measure Guide
(Snapjaw T Only)
Most, but not all high-quality tape measures are compatible with Snapjaw.
Here's what to look for:
Compatibility
Your tape measure must have a relatively standard hook on the end; a thin flange which points down at the end of the tape. "Wings" which point upward at the sides of the tape are OK.
Any tape measures with components which obstruct the top center of the tape, or with unusually thick hooks are not compatible with Snapjaw.
Standout
Standout indicates a tape's strength; how far it will reach without falling.
​
To reach far-away discs, you need a tape measure with high standout.
Sometimes manufacturers advertise "reach" instead, which adds a few feet for the length of your arms.
​
At least 12 feet of standout or 15 feet of reach is recommended.
​
Though Snapjaw only weighs about 10 grams, that extra weight makes it very important to have a sturdy tape for good distance. Don't skimp here!
NOTE:
Many "Magnetic" or "Stud" tape measures have high standout claims, but due to the extra attachments on the end most are
not compatible with Snapjaw!
Recommended Brands
These are known to offer excellent performance with Snapjaw:
​
Milwaukee Wide Blade (BEST)
Crescent Lufkin Shockforce (GOOD)
DeWalt Tough Series (OK)
Stanley FatMax (OK)
​
How long of a tape do I need?
16 feet is ideal. Any longer than that and you're just carrying a larger, heavier tape around.
The extra length won't do you any good.
Pro Tip: Measuring Lies
Draw a line with your sharpie at the 36.25 and 75.75 inch marks on your tape.
From the tip of the Snapjaw:
36.25 inches on the tape = 1 meter
(For measuring from OB lines)
​
75.75 inches on the tape = 2 meters
(For discs stuck in trees when the 2-meter rule is in effect)
​
Both of these length account for the additional 3 inches the Snapjaw adds at the end of the tape. If your tape already shows metric units, be sure to subtract 8 cm if measuring from the tip of the Snapjaw.